@article { author = {Abdollahi Moghaddam, Mohammad Reza and Razavi, Seyed Mohammad Ali and Jahani, Yousef}, title = {Optimization of the Effects of Thermoplastic Starch and Glycerol Concentration on Physicomechanical Properties of Polylactic acid/Thermoplastic Starch Blend by Response Surface Methodology}, journal = {Research and Innovation in Food Science and Technology}, volume = {7}, number = {3}, pages = {309-322}, year = {2018}, publisher = {Research Institute of Food Science and Technology}, issn = {2252-0937}, eissn = {2538-2357}, doi = {10.22101/JRIFST.2018.10.20.736}, abstract = {Polylactic acid (PLA)/Thermoplastic starch (TPS) blends as fully biodegradable materials have the potential of substituting petroleum-derived synthetic polymers for packaging applications and, especially producing disposable containers. In the present research the mentioned blends with compatibilizer were prepared by melt mixing method and the simultaneous effect of the factors of TPS weight percentage (CTPS) on the blend in the range of 10-50% and the glycerol weight percentage in its mixture with sorbitol (CGLY) in the range of 0-100% on tensile strength, impact strength and equilibrium moisture content of the blends was investigated by the response surface methodology. According to the obtained results, the blend with the optimum amounts of CTPS and CGLY of 34.9% and 28.7% respectively had the tensile strength, impact strength and equilibrium moisture content of 28 MPa, 25.5 J/m, and 14.3% respectively. The compatibilized PLA/TPS blend with the optimum amounts of CTPS and CGLY of 34.9% and 28.7% respectively, and the TPS phase containing 35 wt% of mixed plasticizer was prepared by a co-rotating twin screw extruder and its tensile strength, impact strength and equilibrium moisture content were measured. The relative deviation of the experimental data and the data predicted by the regression model for tensile strength, impact strength and equilibrium moisture content were 4.4%, 2.4% and 10.6% respectively.}, keywords = {optimization,Physicomechanical,Polylactic Acid,Response Surface,Thermoplastic Starch}, title_fa = {بهینه‌سازی اثرات غلظت نشاستۀ گرمانرم و گلیسرول بر خواص فیزیکومکانیکی آمیزۀ نشاستۀ گرمانرم/پلی‌لاکتیک اسید به روش سطح پاسخ}, abstract_fa = {آمیزه‌های نشاستۀ گرمانرم/پلی‌لاکتیک اسید به‌عنوان مواد کاملاً زیست‌تخریب‌پذیر، قابلیت جایگزینی با پلیمرهای به‌دست‌آمده از منابع نفتی را برای کاربردهای بسته‌بندی و به‌ویژه تولید ظروف یک‌بارمصرف دارا می‌باشند. در پژوهش حاضر آمیزه‌های ذکرشده در حضور سازگارکننده به روش اختلاط مذاب تهیه شدند و تأثیر هم‌زمان فاکتورهای درصد وزنی نشاستۀ گرمانرم گندم در آمیزه در دامنۀ 10 تا 50 درصد و درصد وزنی گلیسرول در مخلوط با سوربیتول به‌عنوان نرم‌کنندۀ نشاسته در دامنۀ صفر تا 100 درصد بر مقاومت کششی، مقاومت ضربه‌ای و رطوبت تعادلی آمیزه‌ها، با انجام آزمایش‌هایی مطابق روش آماری سطح پاسخ بهینه‌یابی شد. مطابق نتایج به‌دست‌آمده، آمیزۀ با مقادیر درصد وزنی نشاستۀ گرمانرم گندم در آمیزه و درصد وزنی گلیسرول در مخلوط با سوربیتول بهینه به‌‌ترتیب برابر با 34/9 و 28/7 درصد، دارای مقادیر مقاومت کششی، مقاومت ضربه‌‌ای و رطوبت تعادلی به‌ترتیب برابر با 28 مگاپاسکال، 25/5 ژول/متر و 14/3 درصد بود. آمیزۀ نشاستۀ گرمانرم/پلی‌لاکتیک اسید با مقادیر درصد وزنی نشاستۀ گرمانرم گندم در آمیزه و درصد وزنی گلیسرول در مخلوط با سوربیتول بهینه به‌‌ترتیب برابر با 34/9 و 28/7 درصد و با فاز نشاستۀ گرمانرم شامل 35 درصد وزنی مخلوط نرم‌کننده با اکسترودر دوپیچه تهیه شد و مقاومت کششی، مقاومت ضربه‌ای و رطوبت تعادلی آن اندازه‌گیری شد. انحراف نسبی داده‌های آزمایشگاهی و مقادیر پیش‌بینی‌شده توسط مدل‌های رگرسیونی برای مقاومت کششی، مقاومت ضربه‌‌ای و رطوبت تعادلی آمیزه به‌ترتیب برابر با 4/4، 2/4 و 10/6 درصد بود.}, keywords_fa = {بهینه‌‌یابی,پلی‌‌لاکتیک اسید,سطح پاسخ,فیزیکومکانیکی,نشاستۀ گرمانرم}, url = {https://journals.rifst.ac.ir/article_74201.html}, eprint = {https://journals.rifst.ac.ir/article_74201_c24e23b94ff59b8a0e4fbb9057453090.pdf} }