Guide for Authors

The Guide to write manuscripts for "Research and Innovation in Food Science and Technology (JRIFST)”.

 

In order to review and complete the process of the manuscript submitted to the journal, the following 4 files must be sent through the journal's system in compliance with the points and criteria mentioned  in the authors ‘guide:

1- Manuscript file(s) must be prepared in Word 2007 format (with and without name), Click here.

2- Completing and signing the Commitment form,

3- Completing and signing the Conflict of interest form.

4- Completing the Graphic abstract and Highlight.

* The corresponding author is kindly required to upload the image of the  Commitment form and the Conflict of interest form after completing and signing it, along with the manuscript file when submitting a new manuscript.

 

Introduction

Rules to comply  

  1. The manuscript matches the key features mentioned in Aims and Scopes of the Journal
  1. Manuscripts will be accepted for publication whose full text has not been previously published in any magazine or publication or has not been submitted to other journals for publication.
  2. In case the manuscripts have several authors, the individual submitting the manuscript, corresponding author, is deemed responsible for the arrangement of the names and rights of the authors. The author(s) is deemed responsible for the content of the manuscripts.
  3. The manuscript complies with the rules and terms of Author Guidelines.
  1. The manuscripts will be assessed by the editorial board and then with the cooperation of the board of reviewers. Having met the required criteria of the journal, the journal will publish the manuscript in accordance with its priorities.
  2. The language used in the manuscript is standard American English showing accurate command of the language, free from lexical and grammatical error with.
  3. The lines in the manuscripts are required to be numbered. Also, the lines must be double spaced.
  4. For the manuscripts involving human and animals an ethical statement is required. The conflict of interest must be added at the end of the manuscript.
  5. In case the number for figures and tables exceeds more than 6 in total, they have to be submitted as supplementary material of the manuscript.
  6. All the sources used in the manuscript (peer-reviewed articles, websites, books and so on) must be included in the Reference List.
  7. A cover letter containing some information about the novelty of the work has to be submitted along with the manuscript. The Highlights of the manuscript identifying important results of the work is attached to the submitted file. The file must be prepared in such a way that the reader understands what they mean without having to read the whole text. These are presented in 3-5 points, 90 characters each.

 

Type of paper

The journal publishes full research papers, review and short research papers,

Full research papers: Refers to a paper that is based on research or laboratory work having innovation. Also, based on the selected topic, both theoretically and experimentally, the researcher has analyzed the hypothesis and purpose of the research and its method in order to be able to interpret his research and expose it to other researchers for study.

Review paper: This type of paper is very important and reviews the findings of other researchers on a specific topic and reports the status of the latest findings in the field of the researcher's research topic.

Short research paper: This type of paper, an independent, but brief and short report of other published research findings is prepared. Similar research results published as a complete research paper for the second time considering the special features of the topic along with a short discussion to prevent its repetition by others.

Graphic abstract: The graphic abstract should be simple to understand including the process of findings and main results of the paper. It should also be drawn in such a way that the reader can easily understand the principal point(s) of the paper finding it appealing to read the original paper. (Click here for more information).

How to write and edit a manuscript

1) The manuscript must be presented in legible letters based on the journal’s Guideline

2) The manuscript should be prepared on A4 paper holding maximally 20 pages in single column with line numbers and margins of 2.5 cm on each side and then sent through the journal system.

Graphic abstract

Image quality must be at least 300 dpi and applying Times New Romans, Arial, Courier, or Symbol fonts (choose a large enough font size). Considering the format of the image it is highly recommended to be PNG, TIFF or EPS or other formats available on Microsoft Office. Do not include additional content, even including the title "Graphic Abstract", as well as white spaces in the image. The abstract should be drawn coherently with specific beginning and ending, using its elements and writings in the order of top to bottom or left to right. Also, try to minimize the number of elements that clutter the page and distract the reader.

Note: The graphic abstract of the manuscript must be unique and specific to the author of the manuscript and avoid copying images from other sources.

Note: The graphic abstract is displayed in the online search results and the online article, but does not appear in the main manuscript file.

 

Submission checklist

Prior to submission of the manuscript the author(s) are kindly required to complete the present check list

Are all the following items included?

Has one of the authors been designated as the corresponding author with contact details:

  • E-mail address
  • Full postal address

All necessary files have been uploaded:

Does the Manuscript:

  • Include keywords
  • Include all figures (with relevant captions)
  • Include all tables (with titles, description, footnotes)
  • Contain all figure and table citations in the text which match the files provided
  • Indicate clearly if color should be used for any figures in print

Graphical Abstracts / Highlights files (where applicable)

Supplemental files (where applicable)

Further considerations

  • Manuscript’s language has been checked in terms of spelling and grammar.
  • All references mentioned in the Reference List are cited in the text, and vice versa
  • Permission has been obtained for use of copyrighted material from other sources (including the Internet)
  • A competing interests statement is provided, even if the authors have no competing interests to declare
  • Authors’ Guide of this journal has been read in details.
  • Reviewer(s) suggestions and contact details provided, based on journal requirements as mentioned in the “System’s Guide “of the journal.

 

Before you begin

Ethics in publishing

Please see our information on Ethics in publishing.

 

Use of inclusive language

Inclusive language recognizes diversity, shows respect for all people, is sensitive to differences and promotes equal opportunities. Articles should be free of speculations about a reader's beliefs or commitments, should contain nothing that might suggest that one person is superior to another based on race, sex, culture, or other characteristics, and should use inclusive language throughout the text. Writers should ensure that the writing is free of bias, such as using he or she, his/her instead of he or his, and using job titles that are free of stereotypes. (e.g. 'chairperson' instead of 'chairman' and 'flight attendant' instead of 'stewardess').

 

Author contributions

Author contributions for the sake of transparency, the authors are encouraged to submit a declarations file detailing their individual contributions to the manuscript using the relevant credit roles: Presentation of research idea and study design, Data collection, Analysis and interpretation of the data, Writing the draft of the article, data analysis, Revising and editing the article, Supervising the study, Approval of the final version

 

 

Changes to Authorship

All authors are kindly required to have made substantial contributions to all of the following:

  • The conception and design of the study, or acquisition of data, or analysis and interpretation of data
  • Drafting the article or revising it critically for important intellectual content
  • Final approval of the version to be submitted.

If all the 3 conditions are not met, a person cannot be qualified as an author, and any contribution made by them should be mentioned in the Acknowledgements section of the manuscript.

Authors are expected to consider the list carefully and order of authors before submitting their manuscript and provide the definitive list of authors at the time of the original submission. Any changes including addition, deletion or rearrangement of author names in the authorship list should be made only before the acceptance of the manuscript and only if approved by the journal Editor. To request such a change, the Editor must receive the following from the corresponding author: (a) the reason for the change in author list and (b) written confirmation (e-mail, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed.

Only in exceptional circumstances will the Editor consider the addition, deletion or rearrangement of authors after the manuscript has been accepted. While the Editor considers the request, publication of the manuscript will be suspended.

 

Declaration of competing interest

Corresponding authors, on behalf of all the authors of a submitted manuscript, must disclose any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. Such potential conflicts can be regarded as employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/registrations, and grants or other funding. All authors, including those without competing interests to declare, should provide the relevant information to the corresponding author (which, where relevant, may clarify they have nothing to declare). Corresponding author(s) are deemed responsible for submitting this file.

 

Copyright

After accepting a manuscript, authors are asked to enter into an exclusive license agreement (see more information on this). Permissible reuse of Open Access articles by third parties is determined by the author's choice of user license

 

Author rights

As an author you (or your employer or institution) have certain rights to reuse your work. More information.

Elsevier supports responsible sharing

Find out how you can share your research published in Elsevier journals.

 

Role of the funding source

You are requested to identify those who provided financial support for the conduct of the research and/or preparation of the paper as well as briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement, it is recommended to state this.

 

Subscription or open access: your choice

This journal offers authors a choice in publishing their research:

 

Subscription

  • Papers are made available to subscribers as well as developing countries and patient groups through our access programs.
  • No open access publication fee payable by authors.

 

Open access

  • Articles are freely available to both subscribers and the wider public with permitted reuse.

The Journal of Research and Innovation in Food Science and Technology follows the terms outlined by the Creative Commons Attribution 4.0 International (CC-BY 4.0) to be the standard terms for Open Access

 

Publication cost

The cost of editing and page layout for a full research and review paper is 6,000,000 IRR, also a short research paper is 4,000,000 IRR. All the costs must be paid after the review process of the manuscript is over and the final acceptance certificate is issued.

  • Authors coming from countries other than the Islamic Republic of Iran,  no cost is charged for the publication of their paper.

Language (usage and editing services)

Please write your text in accurate English. In case authors feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English may wish to use the English Language Editing service.

 

Submission

Our online submission system will guide you step by step through the process of entering your manuscript details and uploading your files. The system will convert the submitted manuscript files into a single PDF file to be used in the peer review process. Editable files (e.g. Word) are required to typeset the manuscript for final publication. All correspondence, including notification of the publisher's decision and requests for revisions, will be sent via email.

Reviewers

Authors are required to submit with their articles, the names, complete affiliations (spelled out), country and contact details (including current and valid (preferably business) e-mail address) of 3 potential reviewers. Email addresses and reviewer names will be checked for validity. Your potential reviewers must not be from your institute, and at least two should be from a different country. Authors must not suggest reviewers with whom they have collaborated within the past two years. Your submission will be rejected if these are not supplied. Names provided may be used for other submissions on the same topic. Reviewers must have specific expertise on the subject of your article and/or the techniques employed in your study. Briefly state the appropriate expertise of each reviewer. Do not select a referee only because they have expertise on polysaccharides, this is not specific enough. For each reviewer you suggest you must include details of two recent relevant research or review papers authored by the potential reviewer which have appeared in good quality scientific journals. Authors cited in your paper can be useful suggested reviewers, provided that they have published in the field over the last few years.

 

Preparation

Queries

For questions about the editorial process (including the status of manuscripts under review) or for technical support on submissions, please visit our Support Center.

  • In case there is a query contact +989366705437( for Iranians only)
  • Authors from other countries can contact through the e-mail of the journal (jrifst@gmail.com & journals@rifst.ac.ir) and Telegram via 09363317957.

 

Peer review

JRIFST a double anonymized review process. All contributions will be initially assessed by the editor for suitability for the journal. Papers deemed suitable are then sent to the Editor to assess the scientific quality of the paper. The Editor-in-chief is responsible for the final decision regarding acceptance or rejection of articles. Editors are forbidden from being involved in decisions about papers which they have written themselves or have been written by family members or colleagues related to products or services in which the editor has an interest. Any such submission is subject to all of the journal's usual procedures, with peer review handled independently of the relevant editor and their research groups.

  • The initial review of manuscript takes 10 days.
  • The reviewing process of the manuscript takes 2 to 4 months.
  • Electronic evaluation of the journal is done anonymously by at least 3 reviewers (double-blind evaluation).

 

Essential title page information

Title: Concise and informative. Titles are commonly used in information retrieval systems. Avoid abbreviations and formulas as much as possible. Also, the title is aligned in the middle of the line with Times New Roman 14 in bold and its distance from the next line is 10 pt. The beginning of the main words of the English title of the manuscript should be written in capital letters. Please be noted that any changes to the author(s) affiliations and addresses have to be sent to the journal via the Change of Authorship before the publication of the manuscript.

 Author names and affiliations: Please clearly state the first and last names of each author and check that all names are spelled correctly and in full for all names including first name, middle name and last name. The names of the author(s) must be typed in Times New Roman 12 font and in bold aligned in the middle of the line with the distance between it and the next line being 10 pt. Present the authors' affiliation, organization/university, addresses (where the actual work was done) below the names name. Indicate all affiliations with a lowercase superscript immediately after the author's name and before the appropriate address. The address of the organizational affiliation should be left-aligned and typed in Times New Roman 11 font. The country name and the email address of each author are also needed. It is worth mentioning that all authors are required to mention their ORCID id in the manuscript as well as their profile on the journal’s website.

Corresponding Author: Clearly indicate who handles the correspondence at all stages of review and publication, including after publication. This responsibility includes answering any future questions about methodology and materials. Make sure the email address is included and that contact information is kept current by the corresponding author.

Current/permanent address: If an author has moved since the work described in the manuscript was done or was visiting at the time, a current address (or permanent address) may be provided as a footnote to.

 

Highlights

Highlights increase the findability of your article via search engines. They consist of a short collection of bullet points that capture the novel findings of your research as well as new methods used (if any) during the study. Please see the examples here: Example Highlights. Sample highlights. Highlights should be submitted in a separate editable file in the online submission system. Please use “Highlights” in the file name and include 3 to 5 bullet points (maximum 90 characters, including spaces, per bullet point).

 

Abstract

A concise and factual abstract of no more than 250 and not fewer than 200 words is required. The abstract should briefly state the purpose of the research, the main findings and the main conclusions. Numerical values for the most important findings should be given. An abstract is often presented separately from the article in databases, so it must be able to rely on its own. For this reason, vague terms and references should be avoided. Also, non-standard or unusual abbreviations should be avoided, but if necessary, they must be self-defined when first mentioned in the abstract.

 

Keywords

Enter at least 3 and a maximum of 5 keywords immediately after the abstract, use the American spelling and avoid general and plural terms as well as multiple concepts (e.g. avoid and, of). Use abbreviations sparingly: Only abbreviations that are firmly established in the subject area are suitable. These keywords are used for indexing purposes.

 

Introduction

State the objectives of the work and provide an adequate background, avoid a detailed literature review or a summary of the results. The author(s) are required to include the purpose and innovation of the manuscript at the end of this section

 

Hypotheses

Nearly all scientific papers benefit work benefits from the inclusion of a statement of hypothesis. Hypothesis statement. Such statements should be clear, concise, concise and declarative. Meaningful. The statement opinion should describe the one or more key hypotheses that should confirm or refute the work described in the manuscript was intended to confirm or refute. Inclusion manuscript. The inclusion of a hypothesis statement makes it simple easy to contrast the hypothesis with the most relevant previous literature and point out what the authors feel is distinct about think differs from the current hypothesis (novelty). It also permits allows the authors to describe why they feel think it would be is important to prove the hypothesis correct (significance). The hypothesis shall be stated in the introductory section, and the conclusion section shall include the conclusion about whether the hypothesis was confirmed or refuted, as well as describing any new hypotheses generated by the work described. Here is an example of a famous, excellent hypothesis statement; declarative, concise, clear, and testable: "Equal volumes of gases, at the same temperature and pressure, contain equal numbers of molecules." Lorenzo Romano Amedeo Carlo Avogadro di Quareqa e di Carreto (Avogadro), 1811

 

Materials and methods

Provide sufficient details to allow the work to be reproduced by an independent researcher. Methods that are already published should be summarized, and indicated by a reference. If quoting directly from a previously published method, use quotation marks and also cite the source. Any modifications to existing methods should also be described.

 

Theory/calculation

A theoretical section should expand the background of the article already discussed in the introduction, not repeat it, and lay the foundation for further work. A calculation part, on the other hand, represents a practical further development on a theoretical basis.

 

Results and discussion

The results should be clear and concise. This should examine, not repeat, the meaning of the results of the work. A combined results and discussion section is often appropriate. Avoid extensive citations and discussions of published literature.

 

Conclusions

The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Findings and Discussion section.

Appendices

If there is more than one appendix, attachment, they should be identified labeled as A, B, etc. Formulae Formulas and equations in appendices should be given separate numbering: numbered separately: Eq. (1a), Eq. (2b), 2) etc.; in a subsequent episode appendix, Eq. (1b) and so on. Similarly for tables and figures: Table 1a; Fig. 1a, etc.

 

Acknowledgements

Acknowledgment(s) should be mentioned in a separate section at the end of the paper before the references; therefore, do not include them on the front page, as a footnote to the title, or otherwise. All people providing assistance during the research are listed here. (e.g., providing language help, writing assistance or proof reading the article, etc.). In case there is no individual helping, the institute or organization, whose affiliation is mentioned by the author, must be acknowledged.

Footnotes

Footnotes should be used sparingly. Number them consecutively throughout the article. Many word processors can build add footnotes into to the text, text and this feature may can be used. Otherwise, please indicate the position of footnotes in the text and list the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.bibliography.

Statistics

Statistical analysis should be applied appropriately throughout the article.

Units

Internationally accepted recognized rules and conventions must be followed i.e.  use International System of Units (SI). If other units are mentioned, please give their equivalent in SI. Temperatures should be given in degrees Celsius. The unit billion is ambiguous and should not be used. Abbreviations for units should follow the suggestions of the in British Standards publication BS 1991. The full stop/ period should not be included in abbreviations, e.g. m (not m.), ppm (not p.p.m.); ppm); % and / should be used in preference to per cent percent and per. When abbreviations are likely to create ambiguity or might not be understood easily by an international readership, units should be written out in full.

 

Math formulae

Please submit math equations as editable text rather than images. Represent simple formulas as closely as possible to regular text, and use the solidus (/) instead of a horizontal bar for small fractional numbers, e.g. B.X/Y. Variables must always be shown in italics. Please submit mathematical equations as editable text and not as images. Simple present formulas are often more conveniently denoted by exp. Number any equations that must be presented separately from the text (if explicitly referenced in the text) consecutively. The number of each formula is inserted in the right corner of the formula in the due parentheses.

 

Figure captions

Make sure each figure has a caption. A caption should consist of a short title (not on the image itself) and a description of the image. In the figures themselves, keep the text to a minimum, but explain all the symbols and abbreviations used. Make sure you use consistent caption and size from your original artwork. Embed the fonts used if the application offers this option. Try to use the following fonts in your illustrations: Arial, Courier, Times New Roman, Symbol, or use fonts that look similar. Number the figures according to their order in the text. Use a logical naming convention for your graphics files. Adjust the illustrations close to the desired dimensions of the published version. Submit each illustration as a separate file. Ensure color images are accessible to everyone, including those with color vision impairments.

Formats

If your electronic artwork was created in a Microsoft Office application (Word, PowerPoint, Excel), please provide it unmodified in its native document format. Regardless of the non-Microsoft Office application used, once your electronic graphic is complete, please save the images to or convert the images to one of the following formats (note line art, halftone, and line/halftone resolution requirements below): EPS (or PDF): Vector drawings, embed all fonts used. TIFF (or JPEG): Color or grayscale photos (halftones), at least 300 dpi.TIFF (or JPEG): Bitmap line art (pure black and white pixels), at least 1000 dpi. TIFF (or JPEG): Bitmap line/continuous tone combinations (color or grayscale), comply with at least 500 dpi.Please do not: Provide files optimized for screen use (e.g. GIF, BMP, PICT, WPG); these usually have a small number of pixels and a limited color set; Deliver files with too low a resolution; Submit graphics that are disproportionately large for the content.

  • The title of the figure is written at the bottom and in the middle line format (if the title of the figure is more than one line, the line format should be aligned to the left
  • The number of the figure should be placed in parentheses.
  • Photos must have a scale and in case of adaptation from other sources, the source used must be mentioned.
  • Figures that are used from other sources, in addition to the fact that the source must be specified in the title, the responsible author must receive the permission letter from the publisher and send it through the system along with other files.

 

Tables

Please submit tables as editable text rather than images. Tables must be placed after the relevant text in the manuscript. Number tables consecutively according to their appearance in the text and place any table notes below the table body. Be sparing in the use of tables and ensure that the data presented in them does not duplicate results described elsewhere in the article. Please avoid vertical lines and shading in table cells.

  • The title of the table should be typed with highlighted Times New Romans 10 font, and the text related to the explanation of the tables and figures should be typed with normal Times New Romans 10 font.
  • The title of the table is written at the top should be aligned to the left and should be clarify the results it contains.
  • The number of the table should be placed in parentheses.
  • Tables that are used from other sources, in addition to the fact that the source must be specified in the title, the responsible author must receive the permission letter from the publisher and send it through the system along with other files.

 

References

Citing in the text

Please make sure that any literature cited in the text is also included in the references (and vice versa). References cited in the abstract must be cited in full. Unpublished results and personal communications are not recommended in the references but may be mentioned in the text. If these references are included in the reference list, they should follow the journal's standard reference style and replace the publication date with either "Unpublished results" or "Personal communication." Citation of a reference as “in press” means the manuscript has been accepted for publication with an active DOI code which has to be mentioned in the references

Preprint References

If a preprint has later become available as a peer-reviewed publication, the formal publication should be used as a reference. If there are preprints that are central to your work or that cover key developments on the topic but have not yet been officially published, you can refer to them. Preprints must be clearly marked as such, e.g. B. by including the word preprint or the name of the preprint server as part of the citation. The preprint DOI should also be provided.

References management software

The journal reference template is available in many of the most popular reference management software products. This includes any product that supports Citation Style Language styles, such as Mendeley, Endnote based on APA. With citation plug-ins from these products, authors simply select the appropriate journal template when creating their article, and citations and references are automatically formatted in journal style. If you are using reference management software, please ensure you remove all field codes before submitting the electronic manuscript.

  • If Persian sources are used in the manuscript, only the English translation of that source should be mentioned in the text and in the list of sources the phrase (in Persian) must be mentioned in front of them.

 

References style

Text: In-text citations should follow the American Psychological Association's style of referencing. You are referred to the Publication Manual of the American Psychological Association, Seventh Edition, ISBN 978-1-4338-3215-4, copies of which can be ordered online. List: References should first be sorted alphabetically and then, if necessary, chronologically. More than one reference by the same author(s) in the same year must be identified by the letters a, b, c, etc. followed by the year of publication. Examples:

 

Standards

Takemori, T., Tsurumi, T., Takagi, M., & Ito, M. (1993). U.S. Patent No. 5,232,734. Washington, DC: U.S. Patent and Trademark Office.

Institute of Standards and Industrial Research of Iran. (2008). Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds -Part 1: Colony count technique in products with water activity greater than 0.95. (ISIRI Standard No. 10899-1). Retrieved from http://standard.isiri.gov.ir/StandardView.aspx?Id=12277 (in Persian)

 

Theses

Pourashouri, p. (2012). Evaluation of the physicochemical and oxidative stability of microcapsules containing oil fish and omega-3. (Unpublished doctoral dissertation), Sari University of Agricultural Sciences and Natural Resources (in Persian)

Alinasabhematabadi, L. (2015). Protein oxidation in Atlantic mackerel (Scomber scombrus) during chilled and frozen storage. (mastre's thesis), NTNU, Retrieved from https://ntnuopen.ntnu.no/ntnu-xmlui/bitstream/handle/11250/2351628/8731_FULLTEXT.pdf?sequence=1&isAllowed=y

Holopainen-Mantila, U. (2015). Composition and structure of barley (Hordeum vulgare L.) grain in relation to end uses. (Doctoral dissertation), Department of Biosciences, Faculty of Biological and Environmental Sciences, Plant Biology, VTT Technical Research Centre of Finland, University of Helsinki, Retrieved from https://helda.helsinki.fi/bitstream/handle/10138/153489/S78.pdf?sequence=1&isAllowed=y

 

Scientific Journals

Eisa zadeh, H., & Khademian, M. (2006). Preparation of polypyrrole and its composites in various solutions using different additives and studying the orphology and conductivity of the prepared film. Iranian Journal of Polymer Science and Technology, 19(2), 131-136.  doi:https://doi.org/10.22063/JIPST.2006.837 (in Persian)

Osman, M. (2010). Controlling uncertainty: A review of human behavior in complex dynamic environments. Psychological Bulletin, 136(1), 65-86. doi: http://dx.doi.org/10.1037/a0017815

Wolchik, S. A., West, S. G., Sandler, I. N., Tein, J., Coatsworth, D., Lengua, L., . . . Griffin, W. A. (2000). An experimental evaluation of theory-based mother and mother-child programs for children of divorce. Journal of Consulting and Clinical Psychology, 68, 843-856. doi: http://dx.doi.org/10.1037/0022-006X.68.5.843

 

Books

Glaszious, P., Irwig, L., Bain, C., & Colditz, G. (2001). Systematic reviews in health care: A practical guide. Cambridge, UK: Cambridge University Press.

Fatemi, H. (2016). Food Chemistry (pp. 4870 or pp. 368-338): Enteshar Publication Company. (in Persian)

Doust, J. (2010). Evidence about diagnosis. In T. Hoffman, S. Bennett, & C. Del Mar (Eds.), Evidence-based practice: Across the health professions (pp. 128-144). Chatswoord, NSW: Elsevier Australia

 

Conferences and Seminars

Sanaeifar, A., Mohtasebi, S. S., Ghasemi-Varnamkhasti, M., & Siadat, M. (2014, Nov). Application of an electronic nose system coupled with artificial neural network for classification of banana samples during shelf-life process. Paper presented at the 2014 International Conference on Control, Decision and Information Technologies (CoDIT).

Ghorbani Hassan Sariei, A., Shahidi, F., Bahadorghousi, H., & Motamedzadegan, A. (2012, October). Potentials of different omega-3 fatty acids in food enrichments. Paper presented at the 2nd Food Security Conference, Islamic Azad University, Savadkuh Branch. https://www.civilica.com/Paper-FSS02-FSS02_320.html (in Persian)

 

After acceptance

Proof correction

One week after the acceptance certificate is issued, the pre-publication version (Proof) is prepared and sent to the corresponding author in form of a PDF file, and the author is requested to respond to the comments in the file within 2 days and upload the file through the system.